top of page
275051437_938740886815828_3480950216642859596_n.jpg

The Victron MultiPlus 24/500/10-16 combines a true sine wave inverter, an adaptive 4-stage battery charger, and a high-speed AC transfer switch in one compact enclosure. It suits a 24V self-build electrical system where you need dependable mains power on tap, plus a proper charger to top the battery bank back up from shore power or a generator.

The full bridge plus toroidal transformer topology has proven its reliability over many years in the field. The inverter is short-circuit proof and protected against overheating, whether from overload or high ambient temperature.

Key features

  • 500VA (430W continuous at 25°C) pure sine wave inverter with a 900W peak rating for high-inrush loads such as power tools, compressors and LED drivers

  • 10A adaptive 4-stage battery charger (Bulk, Absorption, Float, Storage) plus a 1A trickle output for a separate starter battery

  • 16A high-speed AC transfer switch with UPS-grade changeover in under 20 milliseconds, so connected equipment does not drop out

  • Search Mode cuts no-load power draw by around 70% by switching the inverter off between load checks every two seconds

  • Programmable relay, factory set as an alarm relay for overheat, high ripple or low battery pre-alarm conditions

  • VE.Bus communication port for remote monitoring and configuration via a GX device

  • Can run in parallel with up to five further units, or be configured for three-phase operation

Technical specification

  • Battery voltage: 24V nominal (19-33V DC input range)

  • Continuous output: 500VA / 430W at 25°C (400W at 40°C, 300W at 65°C)

  • Peak power: 900W

  • Maximum efficiency: 91%

  • Zero-load power draw: 6W (2W in Search Mode)

  • AC output: 230V, 50Hz

  • AC input range: 187-265VAC, 45-65Hz

  • Charge voltages: 28.8V absorption, 27.6V float, 26.4V storage

  • Maximum battery charge current: 10A, plus 1A starter battery trickle charge

  • Transfer switch: 16A

  • Communication: VE.Bus

  • Internal DC fuse: 60A

  • Operating temperature: -40°C to +65°C, fan-assisted cooling

  • Protection rating: IP21

  • Dimensions: 311 x 182 x 100mm

  • Weight: 4.4kg

  • Battery connection: screw terminals, 16mm² (6 AWG)

Comes with a 5-year manufacturer warranty as standard (extendable to 10 years). This is a buy-to-order item: once your order is placed we source it directly and ship it straight to you.

Victron MultiPlus 24/500/10-16 230V VE.Bus (400W)

SKU: BIM-PMP241500000
£230.76Price
VAT Included
Quantity
    No Reviews YetShare your thoughts. Be the first to leave a review.
    bottom of page