The MiPV Flextron 330W CIGS flexible solar panel is the highest-output stick-down module in the MiPV range — designed for large expedition trucks, motorhomes, and overland builds where covering most of the roof in a single run makes sense. UK-manufactured by BIPVco on stainless steel foil. At 2434x990mm it delivers 330W from a panel that bonds flat to the roof, sits under 3mm thick, and weighs a fraction of any framed equivalent.
Why it works for overland and van builds: 330W from a single flexible panel is a serious installation — enough to sustain a fully equipped overland truck through a day of cooking, refrigeration, lighting, electronics charging, and water pumping with headroom to spare. CIGS thin-film technology performs consistently in partial shade and overcast European conditions, and the many bypass diodes mean a shadow over part of the panel barely registers in your output. No frame, no rack, no drilling — the Sika peel-and-stick backing bonds directly to the roof for a permanent, weatherproof installation. Note: Voc of 104V requires an MPPT controller rated for at least 110V input — confirm before ordering.
Specifications:
  
Peak Power: 330W
  
Technology: CIGS thin-film on stainless steel foil (UK-manufactured by MiPV / BIPVco)
  
Dimensions: 2434 x 990mm
  
Thickness: ~2.7mm
  
Weight: under 3kg/m²
  
Vmp (Voltage at max power): 85.8V
  
Imp (Current at max power): 3.85A
  
Voc (Open Circuit Voltage): 104.1V
  
Isc (Short Circuit Current): 4.42A
  
Surface: ETFE self-cleaning coating
  
Mounting: Sika peel-and-stick adhesive backing (permanent bond)
  
Warranty: 5-year product, 10-year power output
Important: This panel has a Voc of 104V. You must use an MPPT solar charge controller rated for at least 110V input. Do not connect directly to a PWM controller or standard 100V MPPT units.
Sourced from Bimble Solar. Overland Monkey operates on a buy-to-order model — your panel is ordered from the supplier once your payment is confirmed.