Product Description
 
 
 
 
 
 
 
 Faucet Installation Steps： 
 
 
 
Stage 1: Install Faucet Main Body Take Out the faucet main unit and 3 braided supply hoses from the product package. Feed all three braided water supply hoses upward from the underside of the sink, fully threading them through the reserved mounting hole on the sink countertop, until the faucet base sits flat on the sink surface. Keep the hoses extending downwards under the sink for subsequent connection. 
Stage 2: Mount Sealing Gaskets & Lock Nut to Secure Faucet Base From the cabinet under the sink, slide fittings onto the protruding threaded pipe of the faucet in the exact order below: First, fit the thick rubber gasket tightly against the bottom of the sink countertop to form a waterproof seal. Place the metal steel flange washer over the rubber gasket to evenly distribute fastening pressure. Thread the U-shaped lock nut onto the threaded pipe above the steel washer, pushing it upward toward the sink bottom. The correct stacking order: rubber gasket → steel washer → U nut. 
Stage 3: Fully Tighten Lock Nut to Fix Faucet Hold the faucet spout firmly above the sink to stop the whole faucet from rotating. Rotate the black U-shaped lock nut counterclockwise upward along the threads. Tighten the nut first by hand, then use a cross-head screwdriver to apply extra torque until the faucet base is completely stable without shaking. Caution: Do not over-tighten, as excessive force may crack ceramic or stone sink countertops and damage the rubber sealing gasket. 
Stage 4: Connect Pull-Out Sprayer Hose to Quick-Connect Joint Locate the fast-connect quick-disconnect fitting at the end of the inner pull-out hose inside the faucet body. Align the male connector tip of the pull-out sprayer hose with the quick-connect port, push the hose straight inward firmly until a clear "click" sound is heard, which signals full locked engagement. Give the sprayer hose a gentle downward tug to test that the joint cannot separate, confirming a secure connection. 
Stage 5: Install Weight Ball for Sprayer Hose Retraction Find the gravity weight ball on the pull-out hose, flip open the "OPEN" clip on the weight. Slide the open weight ball onto the pull-out sprayer hose, then close the clip tightly to lock the weight onto the hose. Position the weight on the section of hose that hangs freely under the sink; this gravity weight will automatically retract the spray head back into the faucet spout after use. 
Stage 6: Final Assembly Test & Operation Check Insert the pull-out spray head into the front end of the faucet spout, and screw the threaded joint of the spray head tightly by hand. Pull the spray head out fully several times repeatedly, then release it. Verify the gravity weight pulls the sprayer smoothly back into place without jamming or sticking. If the spray head fails to retract properly, re-adjust the up/down position of the gravity weight ball on the hose. Complete connection between the 3 braided supply hoses and household hot/cold water angle stop valves under the sink. Turn on the water supply, then test both stream and spray modes of the pull-out head. Inspect all joints, the sink mounting hole seal, quick-connect fitting and weight ball position for water drips or leaks. Re-tighten loose fittings immediately if leakage occurs.
 
 
 
 
 
 
 
 
 
🔧【DURABLE STAINLESS STEEL & GUNMETAL GREY FINISH】Crafted from premium stainless steel with a sophisticated gunmetal grey finish, this kitchen tap resists rust, corrosion, and daily wear. The high-quality material ensures long-lasting performance in busy kitchens, whether for farmhouse sinks, commercial use, or camper vans. Easy to clean and designed to stay looking elegant for years.
🚰【3 SPRAY MODES & HIGH ARC 360° SWIVEL】Experience ultimate flexibility with three spray modes: Stream for fast filling, Spray for powerful rinsing, and Pause to prevent splashes while multitasking. The high arc design offers ample clearance for large pots, while the 360° swivel rotation provides full sink access, making it the ideal kitchen mixer tap for any layout.
💧【PULL OUT SPRAYER WITH EXTENDABLE HOSE】Featuring a pull out sprayer with a flexible extendable hose, this sink tap allows you to reach every corner of your sink with ease. Perfect for washing vegetables, cleaning dishes, or reaching deep into farmhouse sinks. The smooth retraction mechanism ensures the hose glides back effortlessly after each use.
🛠️【EASY INSTALLATION & UNIVERSAL COMPATIBILITY】Designed for convenience, this kitchen sink tap comes with all necessary fittings for a straightforward DIY installation. Compatible with standard UK plumbing connections, it is suitable for a wide range of settings including domestic kitchens, laundry rooms, bars, RVs, campers, and even commercial establishments.
🚿【SPLASH-FREE OPERATION & SMOOTH CONTROL】The ceramic disc cartridge ensures drip-free, leak-proof performance with silky-smooth handle control. Whether you're upgrading a farmhouse kitchen or outfitting a camper van, this gunmetal grey tap combines modern style with practical functionality to enhance your daily kitchen experience.