The AUTOTERM Flow 5D is a diesel-powered coolant heater that integrates directly into your vehicle's water circuit — giving you independent cabin heat and engine pre-heating without any additional warm-air ducting.
Whether you're building a campervan, overlanding in winter conditions, or keeping a commercial vehicle ready in sub-zero temperatures, the Flow 5D delivers 5kW of heating output from fuel you're already carrying.
How It Works
The Flow 5D connects to your vehicle's existing coolant circuit and runs independently from the engine. That means you can:
Pre-heat the engine before a cold start — reducing wear and extending engine life
Warm the cabin using the vehicle's existing heating system
Maintain coolant temperature in extreme cold without idling the engine
Run as an auxiliary heater while driving
No warm-air ducting required. No separate heat exchanger. It works with what's already there.
Fuel & Voltage
Available in 12V and 24V versions to match your vehicle's electrical system. Both deliver identical 5kW heating output.
Maximum fuel consumption: 0.62 litres per hour — very economical for the output produced.
Suitable for coolant systems up to 30 litres.
Ideal For
Campervans and motorhomes
Vans and commercial vehicles
Cars, trucks, and off-road vehicles
Marine and boat installations
Any diesel-powered vehicle with an engine up to approximately 4.0 litres
What's in the Kit
Everything needed for a professional installation is included:
Genuine AUTOTERM Flow 5D Heater
Heat insulation jacket
Super-quiet fuel pump
Fuel pump mounting clamp
Complete wiring harness
Combustion air intake pipe with silencer
1 metre exhaust pipe
Fuel standpipe (fuel pick-up)
Heater mounting bracket with vibration-damping mounts
Nylon fuel line
Genuine Pierburg coolant circulation pump
Coolant hose connector
2 metres of coolant hose
Technical Specifications
Specification | Value |
Heating Output | 5kW |
Fuel Type | Diesel |
Voltage | 12V or 24V |
Max Fuel Consumption | 0.62 litres/hour |
Max Coolant System Capacity | 30 litres |
Certifications
ISO 9001 Quality Standards
E2 R10 Approval
E2 R122 Whole Vehicle Approval
Please note: Some newer vehicle models may require an additional EPCU (Electronic Climate Control Unit) module to activate the cabin fan when pre-heating.




