One box replaces three systems. The Autoterm Baltica is a complete hydronic heating solution that handles cabin warmth, domestic hot water, and engine pre-heating from a single compact unit — no separate boiler, no extra plumbing runs, no compromises on van space.
At the heart of the kit is a 13-litre stainless steel expansion tank with a built-in plate heat exchanger. Connect it to the specialist Baltica Flow 5D diesel heater and you have shower-ready hot water in 6 to 10 minutes, plus heat distributed through whatever setup you've built — fan coil blower boxes, radiators, or underfloor heating loops. The system also supports a 1,600W electric mode (two 800W elements) so when you're on a campsite hook-up or running a large inverter, you can heat the water and van without touching your diesel at all.
The included Baltica Control panel handles everything automatically — coolant pump management, temperature regulation, and switching between diesel and grid modes. You set the target temperature; it does the rest.
What's in the box:
Autoterm Flow 5D Baltica-version diesel heater (5kW)
13L Baltica expansion tank with integrated heat exchanger and dual 800W electric elements
Baltica Control panel
Wiring harness and cables
Coolant overflow pipe and installation manual
Important: This system requires the specialist Baltica version of the Flow 5D heater — standard Autoterm Flow 5 units are not compatible due to firmware differences.
Technical Specifications
Diesel Heating Power | 5kW |
Electric Heating Power | 1,600W (2 x 800W elements, 230V) |
Tank Volume | 13 litres |
Hot Water Time | 6-10 minutes to shower-ready |
Recommended Flow Rate | 3.5 L/min |
Max Coolant Temperature | 90°C (safety cutoff 91-95°C) |
Operating Pressure | 1.1 bar max (test pressure 1.9 bar) |
Fuel Type | Diesel (EN590) or HVO100 (EN15940) |
Fuel Consumption | Max 0.62 L/h at full output |
Power Draw | 42W running / 122W start-up (12V) |
Heater Dimensions | 220 x 90 x 136 mm |
System Voltage | 12V DC (heater) / 230V AC (electric elements) |
Altitude Rating | Up to 2,800m+ |
Coolant | Propylene glycol required (Autoterm Aluminium EKO recommended) |
Installation | Vertical mount, minimum 5cm clearance on all sides |
Compatible heating distribution: fan coil units (CHX series blower boxes), radiators, underfloor heating loops. Blower boxes sold separately.




